Performance Rating Practice Videos for Time Study Training!

Not available from any other source! These unique videos contain performance rating exercises recognized by trained Industrial Engineers around the world. Video exercises (and before that, motion picture film) have been the standard method of training time study novices in the concepts of "Normal" operator performance for decades. Now you can procure full-color professionally-narrated videos (on DVD format) for in-house IE or supervisory training.

These materials are used in the Production Technology Work Measurement Workshop, which has been presented to scores of progressive companies for more than two decades. These videos are offered as lower-cost alternatives to the more comprehensive on-site Work Measurement Workshop or the new Time Study Fundamentals program on CD-ROM.

Also now offered is a new program on CD-ROM, Evaluating Operator Performance for Time Study. This is another fine companion learning product for use with rating videos or the Time Study Fundamentals program.



Practice Video #1 - Classic Scenes...Only $129

This practice videotape includes three full-color demonstrations of recognized benchmarks for speed rating. Each exercise is preceded by two full cycles done at normal speed (100% performance). Following the 100% scenes, ten additional scenes are shown in each demonstration. Overall range of performance for all exercises is from 65 to 130%.

rating scenes

The video is accompanied by a performance rating analysis form. This self-explanatory form allows statistical analysis of student proficiency in performance rating. The form may be copied and used on an unlimited basis; the video may be shown unlimited times, but not duplicated without a multiple site license.

This performance rating video is only available in DVD format. A good quality large screen monitor will allow presentation with a group of virtually any size.

Practice Video #2 - Manufacturing Factory Scenes...Only $99

The practice factory video includes ten full-color scenes of factory operations, with several cycles of each shown. Operations involve bench assembly, welding, and interaction with various special purpose machines. Each exercise is followed by a pause for viewers to record ratings. The overall range of performance for all scenes is from 85 to 120%. Scene titles and a few sample frames are shown below:

  • Piston, Bearing and Rod Assembly
  • Check Casting Porosity
  • Punch Press Operation
  • Pump Assembly
  • Tie Rod, Spindle, and Lower Arm Assembly
  • Oil Pump Assembly
  • Automatic Welder Operation
  • Vacuum Brake and Link Assembly
  • Heat Stove Welding
  • Clutch Cover Assembly

    factory scenes

As above, this video is accompanied by a performance rating analysis form. This self-explanatory form allows statistical analysis of student proficiency in performance rating. The form may be copied and used on an unlimited basis; the video may be shown unlimited times, but not duplicated without a multiple site license.

The performance rating video is available in DVD format only.

Practice Video #3 - Manufacturing Factory Scenes...Only $99

This practice factory video includes ten full-color scenes of factory operations, with several cycles of each shown. All scenes are different from the #2 video above.Operations included are taken from automotive and electronic product assembly plants. Each exercise is followed by a pause for viewers to record ratings. The overall range of performance for all scenes is from 80 to 110%. Scene titles and a few sample frames are shown below:

  • Form and Tie Harness
  • Weld Lower Back Panel
  • Crimp Terminals
  • Separate Hybrids
  • Assemble Transmission Indicator
  • Ultrasonic Weld
  • Load Hybrids to Fixture
  • Splice Wires
  • Leak Test Sensors
  • Crimp Baffle to Connector

    factory scenes 3

As above, this video is accompanied by a performance rating analysis form. This self-explanatory form allows statistical analysis of student proficiency in performance rating. The form may be copied and used on an unlimited basis; the video may be shown unlimited times, but not duplicated without a multiple site license.

The performance rating video is available in DVD format only.

Practice Video #4 - Manufacturing Factory Scenes...Only $99

This practice factory video includes ten full-color scenes of factory operations, with several cycles of each shown. All scenes are different from the #2 or #3 videos above. Operations included are taken from metalworking, electronics and consumer product packaging operations in various plants. Each exercise is followed by a pause for viewers to record ratings. The overall range of performance for all scenes is from 85 to 110%. Scene titles and a few sample frames are shown below:

  • Package Football
  • Notch Aluminum Plate
  • Form and Test Flex Circuit
  • Gage and Stamp Impeller
  • Gage Tube and Drill Hole
  • Package Basketball
  • Deburr and Gage Impeller
  • Attach Cable to Sensor
  • Wrap Cable with Foil
  • Solder Flex Tape to Connector Housing

    factory scenes 4

As above, this video is accompanied by a performance rating analysis form. This self-explanatory form allows statistical analysis of student proficiency in performance rating. The form may be copied and used on an unlimited basis; the video may be shown unlimited times, but not duplicated without a multiple site license.

The performance rating video is available in DVD format only.


Practice Video #1 (Classic) is only $129, plus a $7 shipping charge ($12 international).

CREDIT CARD PURCHASE VIDEO#1 NOW

Practice Video #2 (Factory Scenes) is only $99, plus a $7 shipping charge ($12 international).

CREDIT CARD PURCHASE VIDEO#2 NOW

Practice Video #3 (Factory Scenes) is only $99, plus a $7 shipping charge ($12 international).

CREDIT CARD PURCHASE VIDEO#3 NOW

Practice Video #4 (Factory Scenes) is only $99, plus a $7 shipping charge ($12 international).

CREDIT CARD PURCHASE VIDEO#4 NOW

Special Offer - Any THREE Videos $289 plus shipping ($7 or $12)

CREDIT CARD PURCHASE THREE VIDEOS NOW (SPECIFY NOS. WHEN ORDERING)

Special Offer - All FOUR Videos $359 plus shipping ($7 or $12)

CREDIT CARD PURCHASE FOUR VIDEOS NOW

To review the Time Study Fundamentals CD-ROM training package or for more information about on-site training, use the links below.


Navigate by clicking on a selection below:

HOME | SOFTWARE | ON-SITE TIME STUDY TRAINING | COMPUTER-BASED TIME STUDY TRAINING | TIME STUDY STOPWATCHES | CONTACT

Copyright